• Te rugăm copiază/lipeşte mesajul erorii pe care îl vezi pe ecran, dacă apare vreunul.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Explică, te rugăm, ce ai vrut să faci, ce ai făcut, și ce s-a întâmplat

• Care e browserul tău?

• Va rugam copiati/lipiti textul afisat in engleza in locul limbii dumneavoastra. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Este textul acesta disponibil în sistemul de traduceri? Dacă da, a fost tradus mai recent de 24 de ore?

• Care e browserul tău?

• Vă rugăm să explicați sugestia exact și concis, astfel încât să fie cât mai ușor de înțeles.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Care e browserul tău?

• Ce a fost afișat pe ecran atunci când ai fost blocat (Ecran gol? O parte din interfața jocului? Mesaj de eroare?)

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Care e browserul tău?

• Care parte din reguli nu a fost respectată de adaptarea BGA

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Se observă frauda când derulați reluarea? Dacă da, la a câta mutare?

• Care e browserul tău?

• Care a fost acțiunea pe care ai vrut să o faci?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Ce ai făcut de ai produs această reacție/eroare?

• Ce se întâmplă atunci când vrei să faci asta (apare o eroare, un mesaj din partea jocului in partea de sus a ecranului, ...)?

• Care e browserul tău?

• În ce etapă a jocului a apărut eroarea (care era instrucțiunea din acel moment) ?

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Ce se întâmplă atunci când vrei să acționezi în joc (apare o eroare, un mesaj din partea jocului in partea de sus a ecranului, ...)?

• Care e browserul tău?

• Descrieți, vă rugăm, problema de afișaj. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Care e browserul tău?

• Va rugam copiati/lipiti textul afisat in engleza in locul limbii dumneavoastra. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Este textul acesta disponibil în sistemul de traduceri? Dacă da, a fost tradus mai recent de 24 de ore?

• Care e browserul tău?

• Vă rugăm să explicați sugestia exact și concis, astfel încât să fie cât mai ușor de înțeles.

In Carcassonne, scoring animations occur after a player completes features during their turn. In other words, the animations occur at the beginning of the following player’s turn. Unfortunately the time-remaining clock of the following player doesn’t reflect the fact that their time is being consumed while the animations are running.

Hitting refresh (F5) does fix the problem (during the current animation only), and it would no longer be a problem if players could disable animations (see suggestion here: boardgamearena.com/bug?id=169514 ), but hopefully there is also another way to address this predictable clock discrepancy that works well with animations.

Additional details:
The “time remaining clocks” of players and spectators do not count down while animations are occurring. This can be seen in two streaming video excerpts showing an 8 second delay and a 17 second delay (links pasted below). Although the active player’s clocks resume counting down once the animations have finished, they start with the time remaining that the player had before their turn started, rather than with the correct time remaining that also reflects the time it took for the animations to run. Because of this, even under the best connection circumstances, players and spectators see a clock that suggests that the active player has more time remaining than they actually have. Although the active player’s time remaining is “reset” to be consistent with the BGA server’s time once they’ve finished their turn, the time discrepancy persists throughout their turn, making it possible for them to run out of time without realizing it. The two video clips show that clock discrepancies due to animations can be as much as 17 seconds.

Examples:
8 second delay: www.youtube.com/clip/Ugkxa58R5JPxlensRsux1AWFtNnmj_h38GVm
17 second delay: www.youtube.com/clip/UgkxSoBfYPO4q_W3AFiMh3sxiDCX5ClGa7ZU

• Care e browserul tău?