• Te rugăm copiază/lipeşte mesajul erorii pe care îl vezi pe ecran, dacă apare vreunul.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Explică, te rugăm, ce ai vrut să faci, ce ai făcut, și ce s-a întâmplat

• Care e browserul tău?

• Va rugam copiati/lipiti textul afisat in engleza in locul limbii dumneavoastra. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Este textul acesta disponibil în sistemul de traduceri? Dacă da, a fost tradus mai recent de 24 de ore?

• Care e browserul tău?

• Vă rugăm să explicați sugestia exact și concis, astfel încât să fie cât mai ușor de înțeles.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Care e browserul tău?

• Ce a fost afișat pe ecran atunci când ai fost blocat (Ecran gol? O parte din interfața jocului? Mesaj de eroare?)

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Care e browserul tău?

• Care parte din reguli nu a fost respectată de adaptarea BGA

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Se observă frauda când derulați reluarea? Dacă da, la a câta mutare?

• Care e browserul tău?

• Care a fost acțiunea pe care ai vrut să o faci?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Ce ai făcut de ai produs această reacție/eroare?

• Ce se întâmplă atunci când vrei să faci asta (apare o eroare, un mesaj din partea jocului in partea de sus a ecranului, ...)?

• Care e browserul tău?

• În ce etapă a jocului a apărut eroarea (care era instrucțiunea din acel moment) ?

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Ce se întâmplă atunci când vrei să acționezi în joc (apare o eroare, un mesaj din partea jocului in partea de sus a ecranului, ...)?

• Care e browserul tău?

• Descrieți, vă rugăm, problema de afișaj. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Care e browserul tău?

• Va rugam copiati/lipiti textul afisat in engleza in locul limbii dumneavoastra. Dacă ai o captură de ecran cu acest bug (ceea ce îți sugerăm), poți folosi Imgur.com pentru încărcarea imaginii și pentru a pune link-ul aici.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Este textul acesta disponibil în sistemul de traduceri? Dacă da, a fost tradus mai recent de 24 de ore?

• Care e browserul tău?

• Vă rugăm să explicați sugestia exact și concis, astfel încât să fie cât mai ușor de înțeles.

In the rules for the original Mayfair edition of "Streetcar" (which are the rules that are actually linked to from the game page here), the movement phase is handled differently.

Instead of rolling dice to move a streetcar, the rule is that a player may move any distance up to the distance moved by the previous move + 1 square. So, for example, the first player to move may move a max of 1 square. The 2nd time any streetcar moves, it may move up to 2. The next time any streetcar moves, it may move up to 3, etc...

However, the distance is a maximum allowed; a player is not obligated to move their entire allowed distance. And also, streetcars must stop at every station on their route, which resets the maximum distance for the next movement to 1 greater than was actually moved. For example, if a player could move up to 5 spaces, but they reach the stop next to "D" after only moving 2 spaces, then they must stop there and the next movement can only be for up to 3 spaces.

There is a track on one edge of the board to keep track of how far the last movement actually was so that players know how far they can move and that track runs from 1 to 10. For an online implementation, you don't need a track on to the board to track this, but a limit of distance of 10 should be done.

• Care e browserul tău?